Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

800 S. Francisco St.
Mission, TX
USA

Our website is all about motorcycles, especially BMW cycles. We cover rides in the Southwest and Mexico, motorcycle modifications and review motorcycle products. 

Big Bend National Pk.jpg

Reviews

Filtering by Category: "motorcycle touring"

BMW R1200RT and BMW K1200S - A Dilemma

Tomas Perez

The RT in high places...


From Merriam-Webster:
Dilemma
3. a :  a problem involving a difficult choice...

I've had a perfectly good BMW R1200RT since 2010.  I purchased the bike new without a test ride. It was not my first boxer BMW although my last boxer was a 1984 R80RT.  The 2010 was a new model year with engine and body changes.  It was too many positive changes to pass up.

I've always liked the boxer engine.  It has some weak spots but the basic design also has some positive attributes.  And there seem to be many others that feel the same way to the point that BMW boxer has been in production for 90 years.  Even more revealing is the fact that production stopped once but public demand brought the bike back to production.


What I like about it is the simplicity of the engine, low center of gravity, the unique shape and sound of the engine, and the way it feels while under power.  It's hard to describe but it's like a lazy lope at normal highway speeds.  Push it hard and you get a vibration from the engine but it's the low frequency type that does not bother you as much as a high frequency type vibration.  At higher speeds - in the order of over 85 mph - and that vibration is worse.  The times I notice most are when I fall behind a riding group and I'm running much higher than normal speed in an effort to catch up with the group.  But keep in mind that the other 99% of the time I'm one with the bike.  

For the highway I find the RT hard to beat.  Starting with the lower weight as compared to other touring bikes and adding the range that the bike has makes for a very good touring bike.  I have gone 265 miles at high speeds and over 300 miles at lower speeds on a tank of gas.  I can carry 10 days of clothes and camping gear on the bike without too much trouble.  I have also set up my bike with music and GPS navigation which makes long distance travel that much easier.  Don't get me wrong.  It's not all a bowl of cherries.  I've had my share of the typical BMW problems but the basic machine has been very solid.  By the way, let me add that I still don't understand why BMW took so long and in some cases never added some of these problems.  My problems on the RT were the handlebar switches and one fuel strip gone bad.  All things considered I obviously like the RT since I still have it and don't have plans to replace it any time soon.  

But then this year I find this hardly used 2008 BMW K1200S stored in an enclosed trailer.  It had a dead battery and a flashing brake failure light which normally indicates a non functional ABS system.  We put a new battery in it and it starts up right away.  The sound alone was impressive.  Did I mention that it had a Remus muffler on it.  That makes a big difference.  I decide to take a test drive.  Since the bike had hardly been used in about 5 years I was careful and concerned about the test ride.  In addition, it not being my bike I was very gentle with it - no hard acceleration nor hard braking (also had that blinking brake light to worry about).  I did not even check the tire pressure and I also did not check the suspension settings but in spite of this the bike handled very well during my short test ride.  Just months earlier I had purchased a Honda VTR1000 (Super Hawk).  It's Honda's copy of a Ducati - at least as far as engines go.  It's a V twin (90 degree), carburetors, chain, choke - you get the idea... old school hot rod.  In addition it came with a set of carbon fiber mufflers that when I added them it made the bike sound that much more like a hot rod bike.  The bike also had suspension and carburetor work that resulted in a nice total package.  It's about the same horsepower as the RT but it's much lighter and smaller.  I like the handling a lot but the riding position is rather sporty.  



BMW 2008 K1200S 
After test riding the K1200S I could easily see that this bike was in another class.  I know that the Honda is a 1998 and the KS a 2008 but it goes beyond that.  I was forcing myself to stick to the Super Hawk as my hot rod bike with zero intentions of using it for touring.  I liked the basic elements of the Super Hawk and did not want something too close to the functionality of my RT.  That is also the main reason I never considered the GT as another bike.

After riding both bikes for a month I decided the KS would be my second bike.  Now that I have ridden it more - a total of 3000 miles - I am liking it even more.  Although I never meant for it to be used for touring I have added a tail rack to it and use my BMW Sport Bag on it as well as a small waterproof bag.  I added a Ram mount on the battery cover so that I can mount my Zumo 660 but instead I have been using my iPhone for music and GPS.  Having both of these very nice bikes reminds me so much of John F. Kennedy.

I've ridden both bikes back to back to back on the same day.  They are so very different yet I love the way each rides and handles.  That is my dilemma... which will be my main bike?  If I ride one of them for an extended period (days) I look forward to riding the other bike.  My logical side of the brain also tells me that I don't need anything more than the BMW R1200RT but then the K1200S stirs the soul.  There are many times that I ride the KS in a very civil way felling secure that if called upon the bike can do so much more.  Getting on the expressway via an access road is a joke for the KS.  It's just so easy to merge into the flow.  Of course right after that I have to let up on the throttle because I am normally way beyond the speed limit.  It's exactly like they say - the acceleration is intoxicating.  About 10%... maybe more like 5% of the time I tell myself that I need to sell the KS before I get in trouble with it.

Sunday morning breakfast run

Getting back to John F...  My good ole dependable RT is my Jackie Kennedy...  the KS is like... well... like Marilyn Monroe.

For now... I'm keeping both...

tsp



Review - First Impression - BMW Rallye 2 Pro Suit

Tomas Perez

BMW Rallye 2 Pro Jacket - Size 44R USA


This review is for the BMW Rallye 2 Pro riding suit which includes the jacket and pants.  In addition both jacket and pants have winter/rain liners.  Both parts have CE type pads with the jacket having a mesh liner that holds the back, elbow, and shoulder pads.  This suit is meant as a year round suit or perhaps a three season suit in extreme areas.  In my case I intend to use it year round for my long rides.  On short local rides in the summer I still intend to use my BMW Airflow jacket.  For additional protection I have a Rev'It wind barrier for under a jacket and a Tourmaster rain jacket for over a jacket in extreme cold or rain.  This suit is very heavy but like the Airflow jacket it just seems to hang on you so well.  It's like a well tailored suit.  You hardly notice the jacket on you although it is large and heavy.

I'm calling this review a first impression because I only have about 700 miles with this suit and most of that was done in one day.  A followup review will follow soon as I plan to use this suit for my long tour this coming week.  I'm plan on adding a lot more miles to this suit next week.

Let me start by saying that this 700 mile review ride was on a BMW K1200S which is a sport touring bike that leans a lot closer to sport than my 2010 R1200RT - my normal touring bike.  The KS flows a lot more air than the RT on the upper torso.  The legs have about the same amount of shielding on both bikes.  In addition, my "normal" jacket is a BMW Airflow (no number means the latest).  Testing took place in South Texas to Central Texas in August i.e., very hot conditions.

Since I left at 5:00 AM my cold weather riding (in August) was in the low 70's and I was lucky to get that.  I left my house without the liners and all jacket vents open.  The jacket has vents on the back, chest, and sleeves.  The sleeve vents are full length but I just opened the upper part (by the shoulder) a few inches.  As I headed north the temperature dropped to about 70 F just before sunrise.  Certainly not cold but cool enough at 75 MPH to let me feel the air flowing in.  This condition afforded me the opportunity to adjust and/or close the vents while under way.  I wanted to know if I could open and close the vents while under way - excluding the rear vents of course.  With little effort I was able to close the chest and arm vents on the jacket and the thigh vents on the pants.  I decided to stop at a Whataburger and get a few cups of coffee.  While having my coffee I opened all vents again.  I'm expecting high 90's later in the day.  As the sun came up so did the temperature.

I reach my destination in north Austin before 10 AM.  The trip was pretty much uneventful.  I was enjoying the new to me KS - a bike that is very difficult to ride at legal speeds.  The true hot weather test was to be on my return trip.  I installed the K13/K12 rear rack on my bike so that I could use my BMW Sport 2 Small tail pack (that's what BMW calls it).  I invested $200 for the rack because I really like the Sport 2 Small bag and a rack provides a very stable mounting point for these bags.

Review / Comparison: BMW Sport 2 Bags

My bike was competed by mid afternoon.  That is normally the hottest part of the day and sure enough the temperature was 97 F as I pulled away from the dealership.  On my last visit here I purchased a HyperKewl vest and I was carrying it along with my rain gear in the tail pack.  But I wanted to evaluate this suit without any artificial means of cooling and decided not to use it.  Once I hit the country roads the bike is showing 104 F and I can tell it's hot.

The jacket does not flow air like the Airflow but it still did a good job of flowing enough air that I never felt sweat anywhere except my back.  You might know the feeling... you shift so that the back pad comes off your back and you feel the air flow hit a wet spot on your back.  I think the Airflow is very good in this regard partly because the back section that contacts your back has ridges over the entire length.  These ridges allow air to flow up and down your back.  They must be doing the job because it is one of the first things I noticed with that jacket.  The cooling effect of the Rallye 2 jacket was much more obvious when I stopped to gas up and left my jacket on.  Once you get back on the road you feel all these cool spots on your now slightly damp shirt.  It's something you don't notice when you are not moving. The pants flow much better than jeans but not as good as my Tourmaster and Olympia mesh riding pants but they are built much better and protection appears much, much better.  For example the knee pads go around your knees and really stay in place and the pad really goes down your shins to protect that area.  Conclusion: the jacket and pants seem to do the job in hot weather but a true hot weather test has to be above 106 in my opinion.  It's just so different when you get above 105 and then again above 110.  This is when you must close face shields due to the heat blast in your face.  I'm thinking this jacket, because of the way it's built, might do very good at those elevated temperatures.  I'll do an update to this post when I hit those conditions.

I'm using the Rallye suit next week because we are expecting temperatures from over 100 to low 40's  in our multi state ride.  I should also be able to evaluate the liners with conditions like that.  I'm looking forward to putting this suit to the test.  I'm not taking another jacket so I'll be stuck with it for the duration of our tour.  But then again, it's not a bad jacket to be stuck with.

Update:  I have done several long rides with the Rally suit.  My longest ride was the multi state ride I just mentioned above.  I used the jacket every day and the pants I used on days where we expected to ride at least 8 hours.  In other words if we were visiting different areas, parks, shops etc. I used jeans instead of the riding pants.  I packed the liners for both jacket and pants but never used them.  On the cold days I simply zipped up all the vents on the jacket.  In addition, when the temperature was below about 55 F I used my Rev'It wind blocker jacket.  The combination worked very nicely.  I'll be testing the liners this winter and reporting back.

TSP Rating : 9/10 - Do it all jacket?

Pros:
Built quality
High quality pads
Vents
Pockets, pockets, and pockets
Fanny pack.

Cons:
Cost - but you get what you pay for
Heavy
Inside liners will be hard to put on while on the side of the road.

Thanks for reading,
tsp

BMW K1200s - New to me Bike

Tomas Perez

I'm a touring bike type of guy.  Well... maybe sport touring type of guy with much greater emphasis on the "touring" part.  But being a technical type of guy I also realize that everything is relative.

Rolled out of trailer and waiting for a new battery

I've been a fan of the boxer engine for a long time.  I like the way they propel the bike down the highway.  I don't know about the newer boxer engines but the older engines had this awesome burbling sound as they passed you on the highway.  In addition, the vibration of the boxed engine is a low frequency type (compared to 4 and 6 cylinder engines).  It doesn't appear to bother a rider as much as a high frequency buzz.  It's a win-win for a touring rider that spends many hours on the saddle.

But then there are times that you simply want (or need) pure unadulterated power.  At times, while on the RT, I miss the power of a modern 4 or 6 cylinder engine.  Don't get me wrong - the new RT is powerful and fast.  The RT is like two different kinds of bikes.  You have the old man touring mode where you shift at 4K at the highest and the engine never gets close to 6K rpm.  But if you press it beyond 6K rpm it's like a different animal.  On top of that it handles so well that experienced riders can hold their own in most cases.  

Disclaimer - I do not fall in that group...

 A step brother to the RT boxer is the K-GT touring bike.  I recently test drove one and it brought back memories of past sporty touring bikes that I've owned.  The search was on for a K bike.  I didn't want the GT because it's too close to the function/purpose of my RT.  I first looked at the R but found it a bit too raw or naked for my taste.  I then found a very low mileage 2008 K1200s that fits the bill between a tourer and plain bike very nicely.  It's a brute but at the same time can

almost

replace my RT as a touring bike.  The KS strikes a nice balance between a hot rod and a sophisticated long range bike and being a BMW it also has character (some of it good, some of it bad).

My first gas stop.  I was glad to put fresh gas in the bike.

I've ridden the bike 300 miles and it seems like I am adjusting to the riding position.  The proof will be when I use it on 100 to 300 mile rides.  My RT is still my long range tourer and the Super Hawk is better around town than the KS.  My evaluation and ride reports on the K1200s will follow after I added more miles.  I just got it titled, tagged, and insured yesterday.  By the way, insurance for the 2008 K is double what I pay for the 2010 RT.  It must be that 167 HP, 96 ft/lb of torque and 11,000 rpm redline.  In the background of the photo above (gas station photo) you can see some of the vastness of Texas.  It's ideal for a bike like this.  It was so hard keeping it under 75 mph on my way home.  Once, while merging into the interstate, I looked down after shifting though all 6 gears and see 100 MPH on the speedometer.  I'm sure I was shifting at 50% of red line!

Cruising home somewhere on highway 77

Very clean bike.  Cleaned up but not detailed yet...

Bike ready for a run (disregard old sheepskin - it has the low seat)

Update: 2013/07/19:

 The gas tank had so much vacuum at my last two fill ups that I had to use a screwdriver to break the gas cap loose.  A few days later and although the gas tank was still nearly full I decided to investigate and look for the cause.  Tracing the vent line coming off the top of the tank I soon discovered a double kink on it.  It was totally blocked off.  Since the bike is hardly used I am suspecting that this might be a factory error.  It was a simple matter to reroute the line and all is good now.  Since the gas tank was removed I decided to look at the ABS module.  My "brake failure" light has been on most of the time.  It was fairly simple to remove the unit.  It has four brake lines attached on the top, three bolts holding the unit on the bike, and two wire anchor points on the sides of the module.  The unit is off for a rebuild right now.  Update will follow as soon as I get it back.

Line now free flowing

Update: 2013/07/30:

 In a total of 8 days I shipped out the ABS module and got it back after it was rebuilt by Module Masters.  I installed it the same day I got it and my ABS is fully functional again.  The repair was done at a fraction of the cost of what the dealer wanted to fix the ABS.

Update: 2013/08/15:

I took the bike to a BMW dealer to get to bulletins (recalls) done on the bike plus a software (included a fuel mapping upgrade) flash.  The result of the update is better mileage, smoother idling (still not perfect), and much better in town riding when in 2nd or 3rd gear and RPMs less than 3,000.

Update: 2013/10/07:

I got a pair of used Helibars and installed them on the KS.  It's a minor change to the stock bars and they look totally stock but you do notice (feel) the change on long trips.  I did have to modify the left bar a bit to get a better OEM fit of the switch gear.  The standard mounting holes place the switch gang rotated too much in the clockwise direction.  For example the left turn switch was directly under the bar.  The right side can be adjusted but the left side has mounting screw holes to hold the hand grip in place.  What I did was drill another hole slightly CCW from the existing holes.  The photo below shows what I did.  The shiny area around the hole is where I chamfered the hole slightly.  It's a very nice (actually better) fit now.

Helibar Mod

Thanks for reading,

tsp

Review - BMW Pro Touring 2 Boots

Tomas Perez

BMW Pro Touring 2 Boots

Normally I like to really put a product through it's paces before I do a review.  In this case I just purchased these boots last Monday but in that one week I have put them through a rather complete test.  My main touring boots are (were) the Sidi Way Rain boots that are about 8 years old yet still look very good.  Sidi boots are very good but recently I have been looking at the BMW boots.  I was considering two boots - the Airflow and the Allround -  for different reasons.  The Airflow boot should be a cooler boot and I live where it's hot about 10 months out of the year.  But then again, I liked the Allround boot because ... well they are good all around boots.

To my surprise the dealer where I took my bike for a LH switch gear exchange was having a sale on boots including a large number of Allround, a few Air Flow, and one pair of Pro Touring 2 boots.  The Air Flow and Allround boots were discounted to $218 while the Pro Touring had a much better discount.  The regular dealer sticker price was $379 and the sale price was $226.  A quick check with Amazon showed a price of $359 plus $23 shipping so my attention shifted to the Pro Touring 2 boots.  I'm explaining the pricing in detail because I really wanted the Allround boots but for only $8 more I had to get the Pro Touring 2 Boots.

Even though I've only had the boots for a week I have put about 2,500 miles on them, hiked over miles of rough terrain, ridden in the rain, ridden for 100 miles in 44 degree weather, used in a low of 31 and a high of 96 degrees, and walked across a shallow river with these boots.  Let me start off by saying that during all these rides and walks I never felt the boots were an issue.  As a matter of fact the only times I thought about the boots was when I felt I was abusing them like while rock climbing and walking in ankle deep water.

The day after purchasing the boots I had a leg on our tour of about 150 miles from Fort Stockton to Carlsbad Caverns NP.  The temperature was 44 degrees and stayed at that temperature for about 100 miles.  The only issue was that I felt a little cold air flow in from the top of the boot down to my ankle.  I felt the same thing the day before where it was hot (mid 80's) and considered that a nice feature.  But now it was cold and my riding gear was mostly summer gear since we were touring in Texas and New Mexico in late April.  We did not expect these weather conditions.  This was only my second day with the boots and knew little about all its features but while riding I raised my pant leg and redid the Velcro upper closure on each boot.  Totally different feel.  No more cold air drafts!  Totally comfortable in cold weather riding.

The boots claim to be comfortable for every day walking.  I totally agree with this claim after hiking down to the base of Carlsbad Caverns.  It's all down hill for about 750 feet.  It's a tough test for new shoes or boots but once again I had no problems with the boots.  Later that day we rode to Guadalupe Mountain NP and then to Fort Davis.  After we rode up to the McDonald Observatory we went to the old Fort Davis Park and toured the old military base on foot.  More walking with the boots but this time it was mostly on flat dirt and gravel trails.  Easy test for the boots.  The major walking test was the following day at Big Bend NP.  I hiked the Window trail which is 4.25 miles round trip both up and down terrain and rocks and boulders to walk over.  This is where the boots took a beating from the rough terrain but I was surprised by the comfort of the boots and how well they gripped the rocks I had to go over.  I was exhausted after the hike but my feet felt fine.  Next came the Santa Elena Canyon that is craved by the Rio Grande River.

Middle of a very shallow Rio Grande River

I decided to walk to Mexico since the water was so shallow.  My main reason for doing this was to test the waterproof feature of these boots.  I felt the coolness of the water but no water got into either boot.  My stay in the river was only minutes but it did get a little deeper than the photo above.

I used the boots every day for six straight days and really like them.  There is little not to like about these boots.  They are taller than any of my other boots which I like.  I haven't really tested them in very hot weather and by that I mean over 100 degrees F.  The outer material is leather which my Sidi boots are not therefore I would think these boots still need some more break in time.  The leather seems softer than any of my other boots.  They should get even better as the miles add up.

TSP Rating: ********* 9/10

tsp


Rough terrain for hiking


The upper inner material is very soft


After cleaning them up a bit

A Cheap Second Helmet

Tomas Perez

The final two helmets I considered
I went with full face helmets about 35 years ago. For one thing I figured they were safer than an open face helmet. In addition, my motorcycle insurance company was running a promotion on a generic full face help for about $20. I couldn't go wrong with that price but at first I felt all boxed in. It took me a few months to get used to the full face helmet.

So why did I purchase an open face helmet this past week after so many years of using full face helmets? In addition, I recently got a new expensive full face helmet so why buy a cheap second helmet? The reason for the new helmet is my new second motorcycle. It's a bit of a sport bike with that forward lean created by low, narrow bars. I found that when I used my Schuberth C3 I had to really cocked my head back more than normal because the helmet rides rather low over my brow. It's never a problem on my touring bike but doesn't work too well on my sport bike. I found that I really enjoyed riding the Super Hawk without a helmet but that's a no-no. Thus my justification for buying a new helmet.

I intended to purchase a helmet with minimal features and extras. The first ones I looked at were half helmets. The price of a half helmet and a regular open face helmet was about the same so I decided that I might as well get a better grade helmet. We all know the saying... "what value do you place on your head..." The two I settle on are shown in the picture above. I really liked the pilot type helmet shown on the left in the picture above but when I closed the face shield the bottom edge of the shield was about 1/8 of an inch from the tip of my nose. I figured wind blast would push it again my nose. No returns on helmets at the store I was at so I didn't want to risk it. I decided on the Fulmer 75B helmet. In the store it looked very nice and the cost was ok at $109 (plus tax).

I put the helmet on and rode home on the Super Hawk. Once I got home I switched bikes and went out for a ride on my R1200RT. The helmet is very nice. Here are the pros and cons as I see it after a short week of using the Fulmer 75B.
Pro:

  • Economical
  • Light weight
  • Built in sun screen
  • Materials and inside pads seem very good
  • Not too noisy for an open face helmet
  • Sun screen lever is logical
  • Removable liner

Con:

  • More noise than a full face helmet
  • D rings (takes much longer to put on)
  • No lip on clear shield to help in closing and opening shield
  • Venting system inadequate
  • Face shield cannot be fully raised and remains in the line of sight


Front view - shield up



Nice sun screen


Lever used for sun screen

D ring system


Fulmer on left.
$109 vs $750
Schuberth on top
Fulmer liner not bad for the cost

Triumph Trophy SE - First Impressions

Tomas Perez

First ride on the Trophy SE

 

Updated - 2013/1/27 - See Below

I had a chance to ride a 2013 Triumph Trophy for a short test drive recently. My ride was way too short but I was very interested in comparing this bike to my current 2010 R1200RT. These are my first impression of the bike and are not meant to be any type of detailed road test report. Like I said - too few miles to give this bike a truly fair review.

 

A few key points on the 2013 Triumph Trophy SE (BMW 2010-2013 R1200RT figures):

  • Engine - 1215cc liquid cooled inline 3 (Boxer 2 cylinder)
  • Wet weight - 662 lbs (571)
  • HP - 132hp @ 8900 rpm (110hp @ 7750rpm)
  • Torque - 88.5 lb-ft @ 6450 rpm (88 @ 6000 rpm)
  • Gas tank - 6.9 gal (6.6 gal)
  • Cost - About $19,990 (BMW - $17,200 to about $24,000)
  • Maintenance Schedule - minor at 10,000 miles/ Major at 20,000 miles (BMW - 6,000 miles)

 

The Trophy SE is aimed at the BMW R1200RT and perhaps even the K1600GT. Some reports say it is aimed to fall between the two BMW standards. Let me start off by saying that I am a boxer fan. I have always liked the basic engine design and my current BMW is my third of a relatively short list of bikes that I have owned. I'm just keeping my options and eyes open to any new sporty touring bikes. Besides, the Trophy dealer is only 6 miles away vs my closest BMW dealer at 265 miles and my independent mechanic is only a bit closer at 250 miles.

 

The bike was so new that the dealer had just prepped the bike. When my brother and I got to the dealer the bike was still in the bike wash bin. A sales person pulled the bike out to the shop area. I looked the bike over and to me it looked like a slightly larger RT. The bags are a bit strange in that they swing together on their mounts. Push in on one bag and the other bag moves with it. That feature is part of the design and is suppose to prevent bag movement from offsetting the balance of the rest of the bike. I can't speak on this feature since there was no way I could test that. I asked if I could start the bike and was told sure (although we were still indoors and all the doors were closed). One thing led to another and I was finally talked into taking a test ride. As it was, the day was beautiful and I had ridden one of my bikes to the dealer so I had all my riding gear with me.

Sitting on the bike and starting it I immediately notice a few things in comparison to my 2010 RT. The bike looks and is larger than the RT and lifting it off the side stand I also notice that it feels heaver also. Starting the bike had a pro and con for me right away. The pro was that the engine felt very smooth at any engine speed. As a matter of fact I did not have a sensation of high power at any time while at a stand still (not a pro or con). The con for me was that the throttle feel is very light. I mean VERY light! First thing I thought of was that this bike must be drive by wire! (I need to check but I think it is) The soft throttle is probably something someone can get used to after some time with the bike.

Just pulling out of the parking lot

 

Well... time to get rolling. I'll share my points as they came to me during the short ride. No drama putting the bike into gear from the start or at any speed after that. Not as smooth as my RT but I have nearly three years and 36,000 miles to adjust or get used to that bike. Getting on an access road from the dealer's parking lot I slightly over rev the engine before I release the clutch. It's that very soft throttle thing. I adjust my throttle feel again and leave the dealership.

Very normal running through the gears once I'm on the access road. It's my first run thru the gears so in my opinion I am not smooth at all. A new ride and you have to adjust your shifting, clutch and throttle movements. The Trophy has no issues - it's just that all bikes are different in this regard. Thinking about it now I was probably shifting at a too low RPM because that is what I am used to doing. Shifting at low rpm is not an issue with this bike since it has a good torque curve but it did make the bike feel very normal i.e. not exciting. I was expecting more. But to get that rush I am required to rev the engine much higher than what I'm used to. Before I forget to mention it I must say that a big plus for the bike is that the heavy weight seems to melt away as soon as the bike starts rolling. The ST1300 felt a little like that but not nearly as well as the Trophy. Good job by Triumph.

I do a lazy U turn under an over pass to head in the opposite direction. That gives me a chance to rev higher in each of the gears as I approach the on ramp. Ah... much nicer feeling of power and speed. By the time I get on the expressway I'm doing 65 mph. I first notice that I am getting way too much wind in my face and it's noisy. Btw, I use a Schuberth C3 and it's normally quiet as long as there is a smooth stream of air directly across the helmet. I ride an RT and a sport bike with hardly any fairing but this was really bad. I move the wind shield up and down but it is only a smooth quiet ride when I fully raise the wind shield. I don't like riding like that. The RT is much better in this regard and I'm using the OE wind screen on my RT. I think the reason for this is that the RT puts a tremendous amount of air behind the screen. This air stream seems to push the air coming off the top of the screen much higher than it normally would. The wind screen is flat with no curve or flip on the upper edge and it's that way on the RT and the ST1300. This is one of the first things I noticed on the RT when coming off of my Honda ST1300. The ST1100 has an upward flip on the screen and does a better job than the ST1300 of keeping wind off the face of the rider when looking over the shield. But the ST1300 trumps the ST1100 by having an adjustable wind screen. In this regard the RT blows these bikes away (sorry for the pun) and many owners say that after market makes it even better. I'm happy with my RT screen so I still have the OEM screen.

As I move over to the left most lane (i.e. fast lane) I think "after market wind screen" for sure and forget that issue. I up the speed to 70 mph. The bike is smooth - very smooth. If you really search for vibration you have a very slight buzz on the grip and even less on the pegs. I am talking very, very little - nothing to be concerned about. Both the Trophy and RT are very smooth at normal speeds yet very different. I kick it up to 80 mph. Same observations. Move up to 90 mph and it feels much like the 70 mph speed. At higher speeds the Trophy is smoother than my RT. When you push the RT you get that low frequency vibration that in my opinion is much less intrusive than any high frequency vibration or buzz. Push the RT and the engine lets you know that it is working harder. It's part of the boxer "experience". Since there were no cars behind me I slowed down to about 70 mph again and accelerate again to 85 mph. The Trophy had no problems doing this although it did not feel exceptionally fast. Maybe it's because it doesn't give that vibration that my RT gives me when I push it. The Trophy just pushes forward with smooth power delivery. These high speed passes were all performed in 6th gear which is very tall in the Trophy but presented no problems for the bike. It has the power and torque to make these higher speed passes easy. That tall gearing in 6th is a big plus for a touring bike. I like it.

On my way back to the dealer I see a large flea market with a huge parking lot. I decide to turn into the parking lot in order to test the slow speed behavior of the bike. Shortly after getting into the parking lot I turn into a lane that has people walking in the middle of the driving lane. This bike must be quiet because they don't notice me until I am right behind them. I'm riding at slightly faster than walking pace. Conclusion - the Trophy handles very well at slow speed. I did not notice any wobble or hunting for balance when I was doing this. It was as if I had been riding the bike for years. I felt at home.

Out of the parking lot and back on the access road. I decide to stay off the expressway so that I can do more stop and go driving on my last leg back to the dealer. The bike had a seat labeled "Low Rider". I asked if it was a special seat but the sales guys kept telling me that they knew very little about the bike plus they had not received any sales information on the bike yet. As the bike was offered to me it is a lot lower than my Corbin equipped RT with the seat set on the high setting. In the low setting the two are probably much closer but I think the Trophy would still have a lower seat height. I'm 5'10" with a 32 inch inseam. It was a very easy straddle for me. I'm negligent of not checking the seat setting before I rode off on the bike but in any case this is not a tall saddle. Stop and go riding is uneventful. I had no issues of any type. Braking, turning, and lane changes were all easily performed. The one issue, as I stated before, was the soft throttle but it was not as severe as when I first started off. I'm sure it's a matter of getting used to it.

Conclusion...

The Trophy is a sweet ride in many ways but I'm not sure it will knock the RT from my favorite list. I felt the Trophy fits exactly between a two cylinder and inline 4 bike. Like I said at the start of this article - I'm a boxer engine fan. In addition, I like the V-4 engine of the ST1300 better than the inline 3 of the SE. The Trophy just sounded like a lot more was going on while under way compared to the RT. I'm sure that if I ride the bike for a lot of miles many of it's finer points will bubble to the top. Maybe it's mileage or maintenance (lack of) or balance or radio (I did not try it) or the electronic suspension or the total package (what I like about the RT). The Trophy is a very good bike that simply felt normal to me. It did everything well but did not wow me in any. I need to mention that I did not race or push the bike in any way. The Trophy engine is the type that has to be revved to get the extra power from it. It wasn't my bike so I did not push it at all. But saying that I can also see myself being the owner of a Trophy SE for a number of reasons. For now I like the dealer network, range, mileage, options, light feel once it's rolling, and the bike has a good supply of power and torque. I switched from the ST1300 to the RT because of the 160 pounds of weight savings. By the same token the RT is about 90 pounds lighter than the Trophy SE. I see it as carrying a bag of Portland cement on my RT. Maybe not a big task for a young fellow but for my old bones and muscles it swings the scales to the lighter bike.

 

 

Update - 2013/1/27

I forgot to mention something that I think is important. The maintenance schedule for the Trophy consists of a minor service at 10,000 miles (like oil change) and a major service at the next 10K miles i.e., 20,000 miles. The Trophy uses shims under buckets for valve adjustment (major service) so I suspect that they will maintain their setting for a long time. So if you keep your bike for 30,000 miles the Trophy will require only 3 service visits during that time whereas the BMW will require 5 service visits. Double those visits if you keep your bike for 60,000 miles (6 vs 10). Makes a difference. If you do your own service it will be a lot cheaper but the labor and parts are still required. This is big plus for the Trophy. Warranty is 2 years/unlimted miles for the Trophy. The BMW is 3 years and 36,000 miles.

I listed a price of $19,990 above because that is what the dealer quoted me. The actual price of the Trophy SE is $18,990. My local dealer is also charging $900 for frieght and prep making their total cost for the SE nearly $21,000. My understanding is that other dealers don't have this extra charge.

This is a minor point. The Trophy has a rather small fairing pocket but the good news is that it is wired. It's a good place to charge your cell phone or iPod. The pocket is also locked whenever the bike is shut off. The BMW has only one pocket also but it is several times bigger than that of the Trophy. I would never determine a bike purchase based on a fairing pocket but they sure are handy. My RT pocket is always full of things.

 

tsp

 

Wolfman Waterproof Bag Review

Tomas Perez

Wolfman Duffel Bag in the Rain



Wolfman Dry Duffel Bag


This is a short review of the Wolfman waterproof bag.
On my last long tour I used a SAC bag that was given to me by a friend.  Actually he gave me two bags but one seems too small and the other too large.  I used the small SAC bag on my last tour.  I had two problems with the bag 1) it was too small to hold what I couldn't fit into the saddle bags and 2) the bag is water resistant - not waterproof.  I was carrying my sleeping bag and thermarest on top of my seat along with the SAC bag.  Well... that was only good until the first rain.  A friend carried my sleeping bag for the rest of our tour.  The size of the SAC bag is 16 inches long and 10 inches diameter.  

Thus the reason for the purchase of the Wolfman bag.  I looked at several bags including the BMW Roll 2 but the BMW bag is currently selling for about $250.  That's too much for me.  The wolfman looks very good and cost me $103.99 with free shipping.  I got it through Amazon but the shipping company was Rocky Mountain.  I went with the medium size bag.  The official name on my invoice is "Wolfman Expedition Dry Duffel Bag medium yellow".  One thing I like about this bag is that it comes with lots of straps.  I think the total number of straps is 6 straps plus the hand and shoulder straps.

I put a few items in the bag that I will be carrying in this bag because they don't fit in my saddle bags - for example my sleeping bag and pad.  I also threw in a pair of riding pants, waterproof pants, under pants, camp pillow, and a pull over shirt into the bag for the purpose of taking these pictures.  This bag comes in three sizes. All are about 11.5 X 11.5 inches and come in lengths of 20, 24, and 28 inches.  Like I said - I went with the middle size.  By the way, my sleeping pad fits in the bag without having to fold it in half.

The bag straps on to my bike much better in this position
Here's the weird thing about this review... I've never used it on the road let alone in the rain.  But having said that I am sure that it will not leak water.  It's just too well made.  Look at the top photo and you can see that it does not even come close to sitting on the bags.  This size fits perfect even if you mount it lengthwise (see the photo above).  Comes with the straps that you need but I will be using my Rok straps to tie it to my bike.  I will update this review if I need to after I field test the bag.

Another piece of advise... don't fold the opening like I did in the photos above.  It fits and seals better if you fold the opening in small folds.  The straps on each end keep the fold closed on the ends.  The top straps keep it closed on top.  The straps on the seat in the photo above are used to strap the bag on to your bike.

TSP rating for this bag = 8. (1-poor, 10-best)

tsp

Update: Rode in rain and my stuff stayed dry!  In addition to the rain you see in the video above we rode about 400 miles in rain.  I had zero problems with water leaking into the Wolfman.

How Smooth is the Honda ST1300?

Tomas Perez

When I was selling my 2003 Honda ST1300ABS with 48,000 miles I took the picture below to demonstrate how smooth the engine was even after that many miles.  I saw this performed on a used car (Lexus) so I thought I would try it on a motorcycle.  Notice that the engine is idling at about 1100 RPMs.  The coin used is a nickle and no, it is not glued to the gas cap.  :)


I miss that bike but still like my current ride.

tsp